Nowadays, we all have a mobile phone, and many need to increase the signal level. But how to use cell phone amplifiers to improve your signal and ensure the best reception of important calls?

There are several ways to improve the signal of your mobile phone. One of the best ways is to upgrade your phone. With technological advances, each phone is improving, and therefore, signal reception is also improving. With the daily construction of more cell towers, recently released cell phones should have more bars than older phones. Many mobile operators offer subscribers to upgrade their phones, which is highly recommended to support new features.

amplificateur 4g

If you are traveling in a car, one of the best ways to increase the signal level of your mobile phone is to use an amplificateur 4g outside the car. This antenna sticks to the outside of your car and uses a cable to connect directly to your phone. The antenna is really portable, which means that it must not only be installed in the car, but also used elsewhere. If you are in a remote part of your area, the antenna can bring you one or more bands, because it is more powerful than the antenna of your mobile phone, which is usually small or built into your phone.

A step forward is to connect the power amplifier to the antenna and telephone

This is usually the most expensive, but the most effective way to increase the signal of your mobile phone. This connects the cell phone via cable to the amplifier, and the amplifier connects to the antenna. This is mainly used in places where the signal from the cell tower is not at all strong. Areas with an irregular bar or service will benefit from this type of configuration, but it is quite expensive. Also, portable too.

There are several specific configurations for buildings that help everyone in space. Sometimes the building materials used in construction interfere with a cell phone signal. Many times, users cannot even get bars in certain buildings. Reinforcement of building cells will be installed outside the structure. The cable will be routed from this antenna, installed in a position such as the ceiling or where the signal is the strongest. Then the cable will be connected to the amplifier, which will send a signal in the structure, which is beneficial for everyone who needs a cellular signal. Many buildings do not have a configuration that avoids the use of air maps and mobile phones.


Other devices are available for amplifying the signal, including repeaters, power amplifiers, and antennas for amplifying the signal from the cell phone, which are mounted under the phone’s battery. Each configuration has its pros and cons.